Tank Breathers

Fluidyne tank breather cum filter is used for the filtration of the incoming air to the tanks of hydraulic systems. Fluidyne tank breather cum filter are available in threaded, welded and flange connections. Fluidyne tank breather cum filter is available as fill caps and fill-up filters and also available with built in dipsticks.

Specifications:

Flow rate (l/min)	D1	D2	⬡	H1	H2
150	47	1/4' DSP	19	45	12
300	4/	3/8'13SP	19	45	12
450	76	V," BSP	35	66	12
/50	76	3/4' BSP	35	66	16
850	76	1' BSP	38	66	16
150	47	1/4' NPT	19	45	12
300	47	3/8' NPT	19	45	12
450	/6	NPT	35	66	12
750	76	3/4' NPT	35	66	16
850	76	1' NPT	38	66	16

Fluidyne Dip tapes or dipping tapes are made from high quality stainless steel or carbon steel where a dipstick cannot be used.Fluidyne Dip tapes or dipping tapes provides a depth of liquid in a tank but when used in tandem with a conversion strapping table can accurately measure the volume of liquid in a tank. Fluidyne Dip tapes or dipping tapes are made from Lightweight aluminium frame winder. High impact plastic handle. Complete with graduated brass dip weight. Fluidyne Dip tapes or dipping tapes are etched with raised markings. Graduated in mm and meters and available in 5, 10, 20 & 30m versions.Fluidyne Dip tapes or dipping tapes accuracy to EC Class II standard and suitable for general purpose tank dipping and used with a Strapping Table to convert height readings in to a volume.

Fluidyne flashback arrestor or flash arrestor is a safety fitting used in oxygen-fuel –hydrogen service like burner operation, combustion, heating, welding and cutting to arrest or prevent the flame or reverse flow of gas back up into the equipment or supply line and it prevents the user, equipment and system from damage or explosions..Fluidyne Flashback arrestors are reliable protection against dangerous reverse gas flow and flashbacks according to Design Code : EN 730-1 / ISO 5175.

Important Features of Fluidyne Flashback Arrestor

1. Large Surface Area
2. Temperature Sensitive Cut-Off
3. Spring Loaded Non Return Valve
4. Filter at Gas Inlet
5. Protects Gas Cylinder and Pipeline
6. Protects Torches, Burners (high flow)
7. Any Position Mounting

SIZES : ¼” TO ½” RH/LH

SERVICES TYPES
Type –A : Acetylene, Natural Gas, Propane, Butane, LPG, Hydrogen ( Max Pressure - 5kg/cm2)
Type –B : Oxygen, Compressed Air ( Max Pressure- 30 kg/cm2)

Fluidyne Spark Arrestors or spark traps are used for providing a safe exhaust as exhaust leaks are a hazard to employees and workers and hamper engine performance. Sparks are a source of ignition for factory, forest and brush fires. These safety issues are of prime concern and compliance can be met by providing Fluidyne Spark Arrestors that are trap type Spark Arrestors that have a method for removal of accumulated carbon particles, for improved maintenance ease. Three spark arrestors or trapshave exhaust manifolds in two basic configurations, a four-stack design with individual manifolds and stacks, and a two-stack manifold. Fluidyne Spark Arrestors are CCOE approved.

Fluidyne Slot Dipping Device or non-atmospheric sampling gauge hatch provides access to bulk storage tanks and affords protection to persons and the environment when drawing samples, taking temperature and depth readings with dip tape and dip sticks of product and residue. Fluidyne Slot Dipping Device are designed for volatile and or hazardous liquids and product loss is minimised resulting in noxious fumes not released to atmosphere due to hatch chamber. Fluidyne Slot Dipping Device or sampling gauge hatch is an assembly of upper and lower chamber or sections being isolated by a manually operated sealing disc. With the lower section sealed, the closure can be opened and the measuring or sampling device inserted through the bonnet into the top section. The upper section is sealed before disc is opened manually. The device is inserted into the tank and sample is collected or readings are taken with probe. The bonnet fitting entry is plugged, and the closure shut and locked.